CZPT property elevators belong to the standard house elevator design and are widely utilized in North America and CZPTpe. Home elevators refer to elevators mounted in private residences and utilized only by a one household member. It will save construction costs and design place to the greatest extent, even though having treatment of the look and aesthetics of the residence.
|1200x900mm or CZPT
1. It can be used indoors or outdoor.
two. It is simple to set up, no need to have a pit.
three. It operates stably CZPT noise.
4. It can be CZPT in accordance to your demands.
five. It has two management technique: button and distant handle.
six. It has emergency descent system if electricity-off scenario occurs.
How To Use:
A. Just before use:
1. The elevator elevate has been inspected and debugged just before leaving the manufacturing facility, and all technological indicators have attained the design requirements. The user only wants to read this guide meticulously and strictly adhere to the steps when utilizing it.
2. Non-specialists are not allowed to adjust the hydraulic technique, electrical management program and elevator structural elements.
3. When the elevator raise is set up and employed for the 1st time, very carefully examine regardless of whether there is any abnormality in the hydraulic strain, electrical appliances, and structural parts, and debug it only when there is no abnormality. Execute the load check following 3 to five times of no-load. This step is also relevant after the elevator overhaul.
4. The elevator lift has a guiding framework, cautiously verify the verticality and parallelism of the guiding structure, and debug it only right after confirming that the guiding construction is excellent. The elevator shall not be loaded during first commissioning.
5. For elevator lifts that are out of service for a long time, sections two to 4 of this chapter must be carried out ahead of use.
B. In the course of use:
one. The procedure of the elevator is designed as a totally computerized procedure manner. Just simply click the corresponding button on the control box to recognize the corresponding action, and the cabin will end instantly when it reaches the corresponding floor. The realization of these features is recognized by electrical appliances these kinds of as AC contactors and restrict switches.
2. No overloading.
C. Right after use (maintenance):
1. Whether there is abnormal noise in a variety of parts. If so, it need to be dealt with in time.
2. Clean the hydraulic pump right after one particular year of procedure of the elevator lift, and substitute the seriously worn rotating and transmission elements these kinds of as shaft pins.
3. After the elevator elevate has been managing for 1 12 months, examine regardless of whether the management circuit and electrical appliances are corroded and rusted, and whether the joints of the circuit are unfastened, collapsed, rusted, and so on. Uncover troubles and deal with them in time.
4. Replace the hydraulic oil at least after every single six months. If the frequency of use is higher, change the hydraulic oil as soon as every a few months.
one. Is your item CZPT?
Sure, since the conditions are distinct, all merchandise are CZPT relying on element requirement! If you give us more specifics about our merchandise, we will give you a very swift estimate!
two. What is actually the data need to I offer when inquiry?
The much more thorough details you provide, the a lot more correct solution we can prepare for you! This sort of as the potential, carry peak, electricity source or other specials you give us will be more appreciated.
three. What is the least purchase amount?
It is one particular established, and of system, the more the greater.
four. Are you a manufacturer or a dealer?
We are a well-known hydraulic lift manufacturer in China. You are welcome to have a check out to our factory.