Two Semi-Automatic Printer Slotter Machine with Chain Feeder


Specialized PARAMETER:

Name of parameter Unit Specification
RYSY535-2800 RYSY535-3000 RYSY535-3200
Optimum velocity sheets/min 60 sixty sixty
Max.Paper Dimension mm 1600×2800 1600×3000 1600×3200
Max. Printing Dimensions mm 1600×2600 1600×2800 1600×3000
Min.Paper Dimensions mm 420×600 420×600 420×600
CZPT Printing Plate Thickness mm 4-9 4-nine four-9
Corrugated board thickness mm two-12 two-twelve 2-12


The whole equipment perform:

  1. With high precision of approach printing and straightforward procedure.
  2. Separation by electrical power and pneumatic locking up, pneumatic boosting plate and auto changing ink.
  3. Mounting plate technique(Mathew program, optional) to conserve the plate changing time. foot swap is used to change the printing cylinder when mounting the printing plate.
  4. The anilox roller can be lift up and independent from the printing plate when sheets are not becoming feeded. And the anilox roll hold running when lifted up to avert the ink from drying
  5. Phase adjust controlled electricly (No subject operating or stopping).
  6. Automobile lubrication of the gears with oil.
  7. Slotting component : The upper and lower slotting knife,upper and decrease creasing wheel can be Synchronously moved. The top of the carton can be synchronously altered.  
  8. The up creaser wheel is lined by rubber anvil to safeguard the corrugated board from hurt.  
  9. The gears of the total machine undertake the outstanding good quality steel content is 45# after heat treatment and grinding.

Elements of RYSY535 semi-car printer slotter

description standard Produced remarks
Up slotting roll Dia.175mm Factory Thickness 20mm
Down slotting roll Dia.154mm Manufacturing facility Thickness 18mm
Printing roll Dia.154mm Manufacturing facility Thickness 16mm
Xihu (West Lake) Dis. roll Dia.110mm Manufacturing facility Thickness 15mm
Stress roll Dia.110mm Manufacturing facility Thickness 18mm
Anilox roll Dia.175mm “HAILI”CHINA Thickness 20mm
Rubber roll Dia.175mm “XIHU (WEST LAKE) DIS.I”CHINA Thickness 18mm
Wall 40mm Manufacturing facility steel
equipment forty-60mm DHangCZPT Equipment Creation CO.,LTD 45# steel following heat treatment method and grinding
bearing   “HangCZPT”CHINA  
electrical euqipment   “ZHENGTAI”CHINA  
Principal motor 7.5 KW “HangCZPT”CHINA Electromagnetic motor
Air compressor   “JIEBAO”CHINA  
pneumatic component   “HENGYI”CHINA  
Ink pump   “YANGZI”CHINA  

Support motivation and high quality assurance from maker
The high quality assurance is manufactured up of a few components:

one. The overall performance of the machine is of excellent good quality( support is offered for cost-free if the electrical equipment application need to be upgraded).

two. Supply a good technological guidance.
3. Offer function guide,typical faults getting rid of handbook,circuit diagram, the producer supply training for free in principle and in apply.
Acceptance standard

one. Cardboard regular

The seller sold the machines to make certain perfect fit A, B, C, E shaped a few ply corrugated board and A, B, C, E corrugated board with 5, and 7 post-processing software, Kraft’s excess weight ranged from 125g to 250g and corrugated bodyweight ranged from 105g to 150g.

two. Screening requirements

Corrugated cardboard have to be appropriate stage of quality for the market place, its curvature diploma can not exceed bending coefficient of .015mm. This element refers to when the cardboard width of 600mm the top difference in between the bending cardboard, and the examination cardboard can be according to this proportionality aspect, but the greatest bending does not exceed 15mm, for illustration:

Cardboard width    bending height   bending element  
          300mm                 four.5mm          .015mm
          600mm                 9mm             .015mm
          1000mm              15mm            0.015mm

  1. Print material need to be of very good quality and cost-free from fouling, printing-plate substitute.
  2. For screening the cardboard measurement range: the scope of any size in the mechanical style technical specs.

Velocity measurement: Cardboard according to the equipment maximum size of 70% and minimum dimension of forty% to style device velocity, with sizes of 600 × 800, the speed can achieve eighty% of design and style velocity. The aforementioned machine speed can guarantee precision of the adhering to capabilities. If print drag must be added.

  1. Print high quality: in the printed dimensions assortment the very first color printing with cardboard edge as a reference stage, register precision assortment of ± 1mm, second coloration, third color and fourth shade use the initial color as a reference level, sign up accuracy range of ± 1mm,can not have cost-free print or printed coloration uneven availability phenomena, and do not remaining ink in the non-printing element.
  2. Slotting register: Slotting device can create a few and 5, and seven corrugated board, the path of the machine operate registration precision range: ±1mm
  3. Tests normal

In accordance with the over situations, the machine should be capable to proceed purpose underneath the provisions of the highest speed for at least two hours in the interval of device tests.

We have more than 20 years’ knowledge in manufacturing corrugated cardboard creation device field.
Top top quality, Aggressive price, Well timed shipping and delivery and Coronary heart-to-heart provider.
Your Best Associate in China!!


Two Semi-Automatic Printer Slotter Machine with Chain Feeder